I am going to use the audio from our radio guy to go along with our stream feed. He has only main output L & R left to use on his mixer which is a 1/4" phone plug. I am then need to use some type of adapter to convert it to an XLR connection which is what I have plugged into my mixer. I have had several people give me several different things on what I should do to make it work. I was actually looking for a dual phone jack to XLR adapter cable and did find one but it was way too expensive for no more than what we are doing. I was actually looking at using something like this https://www.amazon.com/gp/product/B0...f_rd_i=desktop to then add to this https://www.amazon.com/dp/B00WZQH0M8...WA1PPAW13&th=1 which will then run into a 35' XLR cable hooked up to my mixer.
Someone suggested this may be better for a combination This https://www.amazon.com/gp/product/B0...f_rd_i=desktop into this https://www.amazon.com/gp/product/B0...f_rd_i=desktop which will also then run into a 35' XLR cable hooked up to my mixer.
Someone also suggested running 2 separate cables to my mixer by using something like this but 2 of them. https://www.amazon.com/dp/B00WZQH0M8...=1JK1WA1PPAW13
The problem with the last one is that it is a run of 40'. I would need 2 40' runs.
So let me run through my scenario of what I am going to do again. Go from main out phone jack L & R and somehow get it to my mixer 40' away and into an XLR input. Any ideas? Thanks.