Results 1 to 2 of 2
  1. #1

    Junior Broadcaster
    Join Date
    Jul 2013
    Rep Power

    Right type of audio cable to use.

    I am going to use the audio from our radio guy to go along with our stream feed. He has only main output L & R left to use on his mixer which is a 1/4" phone plug. I am then need to use some type of adapter to convert it to an XLR connection which is what I have plugged into my mixer. I have had several people give me several different things on what I should do to make it work. I was actually looking for a dual phone jack to XLR adapter cable and did find one but it was way too expensive for no more than what we are doing. I was actually looking at using something like this to then add to this which will then run into a 35' XLR cable hooked up to my mixer.
    Someone suggested this may be better for a combination This into this which will also then run into a 35' XLR cable hooked up to my mixer.
    Someone also suggested running 2 separate cables to my mixer by using something like this but 2 of them.
    The problem with the last one is that it is a run of 40'. I would need 2 40' runs.
    So let me run through my scenario of what I am going to do again. Go from main out phone jack L & R and somehow get it to my mixer 40' away and into an XLR input. Any ideas? Thanks.

  2. #2


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts