rixthemix Posted June 6, 2013 Share Posted June 6, 2013 Is there anyway to stop the echo/latency on Sam BC ? its doing my nut in - i want to be able to listen to myself in real time not in delay Link to comment Share on other sites More sharing options...
SmoothJazz Posted June 6, 2013 Share Posted June 6, 2013 Have you read this thread at Spacial? http://support.spacialaudio.com/forums/viewtopic.php?f=20&t=36394&p=185945&hilit=mic+latency+echo#p185945 http://5280jazz.com/nowplaying_image/5280jazz.png Rob Oyler 5280 Jazz Link to comment Share on other sites More sharing options...
rixthemix Posted June 7, 2013 Author Share Posted June 7, 2013 Hi Yes - Tried all that its still a bit hooky thanks for the link though Rix Link to comment Share on other sites More sharing options...
PapaBearPW Posted June 8, 2013 Share Posted June 8, 2013 I don't think there is a lot that can be done to prevent the delay/echo. What I remember of SAM was that there was something in the AGC for mic where I could set it to be sent directly to the encoder. This kept me from having to deal with the echo from my microphone. Since I haven't used SAM since a demo of v4 a long time ago, I can't say exactly where these settings may be today. But, that's the thing with SAM. It will work great for you as long as you get ALL the settings right. And those settings will be different from one PC to another. So, it's all a matter of trial and error until you get it right. Again, I haven't used SAM in years, so... http://www.lunarcaster.com Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.